Graco 3A0860F Bedienungsanleitung

InstructionsUSP Valve3A0860FUniblock Series Progressive Valve for oil and grease lubrication.5076 psi (35 MPa, 350 bar) Maximum Working PressureModels

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Warnings 2 3A0860FWarningsThe following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point

Installation3A0860F 3InstallationThe USP Valve should be ready to install in your sys-tem. It has been factory-tested and should not require any addit

Installation 4 3A0860FPurging Air from Pump to USP Valve LinesSteps 1- 3, refer to FIG. 3.1. Install the line from the system pump to the USP valve. D

Installation3A0860F 5BlockagesBlocks require a higher than normal pumping pressure. Depending on the application or system design, this blockage will

Parts 6 3A0860FParts*231Torque to 15 - 18 ft.-lbs (20.3 - 24.4 N.m)11Torque to 8 - 10 ft.-lbs (10.8 - 13.5 N.m)22ti1406654FN Part No. Description Qty1

Technical Data3A0860F 7Technical DataDimensions Wetted Parts Steel, FluorocarbonMaximum Pressure 5076 psi (35 MPa, 350 bar)Maximum Operating Temperat

Technical Data 8 3A0860FOutlet Pattern NumberingNOTE: • Port combinations do not continue across factory plugged outlets. Factory plugged ports are in

Notes3A0860F 9Notes