Graco 312668W Bedienungsanleitung PDF herunterladen (Seite 17)

LDP5 Meter Setup and Operation Instructions

312668W 17

Keypad Buttons (FIG. 22)

• Manual / Reset*

Used to select Manual Mode dispensing (see

Terms). The first push selects the mode, and the

second push resets the display to zero.

• Auto / Reset*

Used to select Auto Mode dispensing (see Terms).

The first push selects the mode, and the second

push resets the display to zero.

* Press Manual / Reset and

Auto / Reset buttons simul-

taneously to display the

Setup Menus (page 17).

• Total

Used in any mode to see the

resettable total and the non–resettable total.

• 10, 1.0, and 0.1

Used in Auto Mode and during setup to enter dis-

pense amounts.

Setup Menus (FIG. 23)

1. If the display is blank (asleep),

wake it up by pressing any

button on the keypad.

2. Press and hold the Man-

ual/Reset and Auto/Reset

buttons simultaneously for

approximately 6 seconds to

enter the Setup Menus .

3. There are five (5) Setup Menu screens available,

stored in a preset order.

a. The first screen displayed is the Resettable

Total Menu (F

IG. 24, page 18). When the menu

is displayed, R-TOTAL (G) will blink in the lower

right corner on the screen.

b. Press and hold the Auto /

Reset button to display

the Units of Measure

Menu (F

IG. 25, page 19).

When this menu is dis-

played the last set Unit of

Measurement blinks in

the lower right corner on the screen.

IG. 22

All buttons are disabled while fluid is being dis-

pensed.

GAL

QTSPTS

LITERS

R-TOTAL

AUTO

ti12052a

FIG. 23

During the first 4 seconds all segments display.

Then for 2 seconds the software version number

displays.

GAL

QTSPTS

LITERS

R-TOTAL

AUTO

ti12053a

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Graco 312668W Bedienungsanleitung Seite 17

Kommentare zu diesen Handbüchern