Graco Child Car Seat with Harness System Bedienungsanleitung PDF herunterladen

Place forward-facing on vehicle seat.

Lift seat pad flap, thread vehicle seat belt

through openings and buckle belt (fig. a).

Press down firmly in center of car seat to

compress vehicle seat cushion while tightening

vehicle seat belt.

HINT: Use your knee to press down in center

of car seat (fig. b).

Pull front to back and left to right to check for

secure installation (fig. c).

If not secure, see “Vehicle Seat Belts” section.

Attach tether hook (A) to anchor hardware (B)

and tighten strap to remove any slack (fig. d).

If tether anchor hardware (B) is not available,

see “Installation of Anchor Hardware“ section.

INSTALLATION

- with harness system

(fig. a) (fig. b) (fig. c)

(fig. d)

Opening

(A)

(B)

Pull to

tighten

1 2 3 4

Inhaltsverzeichnis

Seite 1 - INSTALLATION

Place forward-facing on vehicle seat. Lift seat pad flap, thread vehicle seat belt through openings and buckle belt (fig. a).Press down firmly in cent

Seite 2 - - removal and re-assembly

HARNESS SYSTEM - removal and re-assembly3Removal:•Lift adjuster bar and pull both harness straps out of current slots.•Pull harness strap out of car s

Seite 3

413452HARNESS SYSTEM - removal and re-assembly (continued)ClipClip

Seite 4 - HEIGHT and WEIGHT LIMITS

Without Harness SystemWith Harness SystemChild MUST meet all of the following requirements:• Weight is 30 - 40 lbs. (13.6 - 18.1 kg).• Minimum height