311493EInstructionsDirect Immersion Kit 287843 for GH833, 733ES, 833ES, 933, 933ES, 5040ES- For installation of tower/bracket -GH833 Models: Refer to
10 311493ETransporting UnitNOTE: Do not transport unit with head in vertical position. When transporting unit securely tie down in vehicle or follow
Parts311493E 11Parts342222a24232019232523232314131313134283582915112791010311161717776ti7642bRef Part Description Qty1 287897 SUPPORT, frame12 287896
Parts 12 311493EDimensions80594178All dimensions are in inchesti9176a
Notes311493E 13Notes
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th
2 311493EFixed Mounting (optional)To prevent damaging the unit when transporting it in a truck or on a trailer, Graco recommends fixed mounting to th
311493E 3Securing Unit to Vehicle BedFor fixed mounting, fasten U-bolts over sprayer frame as indicated in the following illustration.1. Reposition ha
4 311493EGeneral InformationPressure Relief Procedure1. Engage trigger lock.2. Set pump valve OFF. 3. Turn engine OFF.4. Turn pressure to lowest sett
311493E 5Removing Hydraulic Head and Pump1. Follow Pressure Relief Procedure, page 4.2. Allow unit to cool. 3. Remove two hydraulic lines from head an
6 311493EInstalling Direct Immersion Kit1. Install tower/bracket into frame holes.2. Install four retaining screws in frame to hold tower/bracket in
311493E 7Using Direct Immersion 1. Apply pipe thread sealant 119400 over male threads on pump.2. GH833, 833ES Models Only: Attach female hose adapter
8 311493E8. Install strainer (23) to bottom of intake tube (24).9. Install intake tube (24). Lock female hose adapter (22) to hold intake tube secure
311493E 93. Move sprayer/tower/bracket (unit) and align new drum under pump assembly.4. Ensure gasket (22a) is in place and install intake tube (24).
Kommentare zu diesen Handbüchern