Graco 308357G Bedienungsanleitung

Instructions – Parts ListGRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441Copyright 2002, Graco Inc. is registered to I.S. EN ISO 9001CARBON STEELDu

10 308357Notes

308357 11Troubleshooting ChartWARNINGTo reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow thePressure Re

12 308357ServiceWARNINGTo reduce the risk of serious injury whenever youare instructed to relieve pressure, always follow thePressure Relief Procedure

308357 13Service9592AFig. 412Torque to 129–142 N.m (95–105 ft–lb)Torque to 312–340 N.m (230–250 ft–lb)1011051061081021071031041221121VUApply LoctiteR

14 308357ServiceDISPLACEMENT PUMP SERVICEDisassemblyWhen disassembling the pump, lay out all the removedparts in sequence, to ease reassembly.NOTE: Re

308357 15Service9. Examine the displacement rod (1) for scratches orother damage. Only if the rod needs replace-ment, unscrew it from the piston ball

16 308357ServiceReassembly1. If it was necessary to remove the piston ballhousing (12) from the displacement rod (1), cleanthe threads of the rod and

308357 17Service03984Fig. 81234Torque to 129–142 N.m (95–105 ft–lb).Torque to 522–542 N.m (385–400 ft–lb).Torque to 386–407 N.m (285–300 ft–lb).Apply

18 308357PartsPart No. 236932 Pump, Series A74:1 Ratio, with Premier Air MotorRef.No. Part No. Description Qty.101 222800 AIR MOTOR, PremierSee 308213

0398391171615*10*20*13122*ThroatPackingStack(see page 20)*PistonPackingStack(see page 20)1410*112728*29308357 19PartsDisplacement Pump 236478, Series

2 308357Table of ContentsWarnings 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation 6. . . . . . . . . . . . .

20 308357Repair KitsStandard Repair Kit 237166(Leather Packings and PTFE Backup)Ref PartNo. No. Description Qty3* 109306 V-PACKING; PTFE 24* 184201 GL

308357 21Technical Data(MODEL 236932 PREMIER PUMP)Category DataRatio 74:1Maximum fluid working pressure 500 bar (7252 psi)Maximum air input pressure 6

22 308357Technical Data(MODEL 236932 PREMIER PUMP)To find Fluid Outlet Pressure (psi/MPa/bar) at a specific fluid flow(lpm/gpm) and operating air pres

308357 23Dimensions9589AABCDEFGMounting HoleLayout67.5 mm(2.7 in.)135.0 mm(5.3 in.)50.7 mm(2.0 in.)101.5 mm(4.0 in.)ThreeM16 x 2.0HolesPremier Pumps96

24 308357Graco Standard WarrantyGraco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workma

308357 3WARNINGSKIN INJECTION HAZARDSpray from the gun, hose leaks, or ruptured components can inject fluid into your body and causeextremely serious

4 308357WARNINGFIRE AND EXPLOSION HAZARDImproper grounding, poor ventilation, open flames or sparks can cause a hazardous condition andresult in a fir

308357 5InstallationGroundingTo reduce the risk of static sparking, ground the pump,object being sprayed , and all spray/dispensing equip-ment used or

6 308357InstallationNOTE: Reference numbers and letters in parenthesesin the text refer to the callouts in the figures and theparts drawing.NOTE: Acce

308357 7InstallationASSEMBLE THE PUMPAssemble the displacement pump (105) to the airmotor (101) as instructed on pages 12–13.SYSTEM ACCESSORIESWARNING

8 308357Operation/MaintenancePressure Relief ProcedureWARNINGSKIN INJECTION HAZARDFluid under high pressure can be in-jected through the skin and caus

308357 9Operation/MaintenanceStarting and Adjusting the Pump1. Refer to Fig. 2 on page 6. Connect the suction kit(T) to the pump’s fluid inlet, and pl