Graco 313759A Bedienungsanleitung PDF herunterladen

313759A

Instructions

Oil and Grease

Piston Distributors

- For injecting lubricant from an intermittent pump system.

Suitable for use in centralized, single-line, lubrication systems. -

Models: Page 2 (includes working pressure)

Important Safety Instructions

Read all warnings and instructions in this

manual. Save these instructions.

WARNING

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and

cause serious injury.

• Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,

checking, or servicing equipment.

• Tighten all fluid connections before operating the equipment.

• Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

1 2 3 4 5 6 ... 17 18

Inhaltsverzeichnis

Seite 1 - Piston Distributors

313759AInstructionsOil and Grease Piston Distributors - For injecting lubricant from an intermittent pump system. Suitable for use in centralized, sin

Seite 2 - 2 313759A

Technical Data 10 313759ATechnical DataOil Grease Piston Distributor Mounted Directly to Greasing Point - OilLubricant Synthetic and mineral oilsWorki

Seite 3 - 313759A 3

Technical Data313759A 11Single Point Manifold DimensionsNOTE: All dimensions are provided in Metric (mm) only.FIG. 5ABCDEFGHHMNKLFitting and Sleeve Pi

Seite 4 - 4 313759A

Technical Data 12 313759A15X670 M10 / M8 18 5 100 88 25.4 15 18 16 7.5 615X671 M10 / M8 18 6 116 104 25.4 15 18 16 7.5 615X672 M10 / M8 18 7 132 120 2

Seite 5 - Complete Castings

Technical Data313759A 13DimensionsModel 3500/3510 Mounting Hole Locations (see note with dd). aa Flow Indexbb Outlet Numbercc Pipe = Ø4dd Mounting Hol

Seite 6 - 6 313759A

Technical Data 14 313759ADimensions (All models)** Casting dimensions are the same for both oil and grease manifolds. However the nipple height is tal

Seite 7 - Metering Nipples

Technical Data313759A 15Single Point OilSingle Point Grease (NLGI 00-000)FIG. 9BCDABDDBCC3400 3500 3900REF Description 3400 3500 3900AOutlet Pipe Conn

Seite 8 - Single Line Circuit (FIG. 1)

Technical Data 16 313759APiston DistributorsType FA10BFlow IndexC M14 x 1.5D40.6E32.5F23.5G Ø11.7HousingH17J M14 x 1.5K15L35Type GCA13.5B10CM3D50EFlow

Seite 9 - B Copper Washer

Notes313759A 17Notes

Seite 10 - Technical Data

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Seite 11

2 313759AModels3400 (Oil) / 3410 (Grease) Single Point Series Part No.FluidDispense Volume (cm3)Operating Pressure Range psi (bar) ViscosityFitting &

Seite 12 - 12 313759A

313759A 33500 (Oil) / 3510 (Grease) Single Point Series Part No.FluidDispense Volume (cm3)Operating Pressure Range psi (bar) ViscosityFitting & Sl

Seite 13 - Dimensions

4 313759A3900 (Oil) / 3910 (Grease) Single Point Series Part No.FluidDispense Volume (cm3)Operating Pressure Range psi (bar) ViscosityFitting & S

Seite 14 - Dimensions (All models)*

313759A 5Complete Castings Part No.FluidPlug ColorOperating Pressure Range psi (bar) ViscositySeriesNo. Outlets Oil Grease122841 3400 2✔Red 145 - 653

Seite 15 - Single Point Oil

6 313759ADirect to Bearing Piston Distributors (Lubricant - Oil)122890 3910 2✔White 145 - 653 (10 - 45)(Oil) 32 to 2000 MM^2/S.047 to 3.1 in. 2/S(Gre

Seite 16

313759A 7Metering Nipples1 Part No. 122989 is a kit consisting of a nipple and corresponding piston for oil. Must remove existing piston and casting w

Seite 17 - 313759A 17

8 313759APressure Relief ProcedureThe equipment may be pressurized or may become pressurized by an automatic lubrication cycle initiated by a lubrica

Seite 18 - Graco Standard Warranty

313759A 9Nipple Installation InstructionsA M8x1 connection for fitting + sleeveB Copper WasherC M10 x 1 or M12 x 1 straight fitting for dosers 1. (If